Shop By Brand
  • Accessories
  • Try our new Cork Yoga Brick for soft but solid support

  • Check out our full lineup of yoga accessories to help you with your daily meditation practice and fitness goals...

  • Shop
  • Meet our lovely team!

  • PLA Filament EasyFil PLA 2.85mm Glow in the Dark Green 750 gram 3D Printer Filament

    Risk-Free 14 Day Returns

    If you change your mind, return it to us within 14 days of the date you received it, no questions asked.
    T&Cs apply


    EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.
    Very easy to print
    Warp-free printing and no deformation after cooling
    Improved flowing behaviour and inter-layer adhesion
    Good first layer adhesion to several (un)heated print surfaces
    Slightly softer than standard PLA resulting in improved strength and impact resistance
    Almost odourless processing/printing


    General printing guidelines

    Nozzle size: ≥ 0.15mm

    Layer height: ≥ 0.1mm

    Flow rate: ± 100%

    Print temp: ± 180 - 220° C

    Print speed: Medium

    Retraction: Yes - 5mm

    Heat bed: ± 0 - 65° C

    Fan speed: 50-100%

    Experience level: Beginner

    Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

    Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature.  In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.

    Filament length

    ρ: 1.24g/cc

    50 gr coil

    0.75 Kg spool

    Ø 1.75mm

    ± 16.8m

    ± 251m

    Ø 2.85mm

    ± 6.3m

    ± 95m

    Product export information
    HS Code: 39169090
    Description: Monofilament
    Country of origin: the Netherlands

    Package Content

    1x PLA Filament EasyFil PLA 2.85mm Glow in the Dark Green 750 gram 3D Printer Filament


    Trust Pilot Top Rated